Keysight U1732C - Changing the User High;Low Limit Values; Table 3-4 Default User High;Low Limit Values

3Setup Options
80 Keysight U1731C/U1732C/U1733C User’s Guide
Changing the user high/low limit values
This setting is used with the Limit comparison function (page 58). There are 16
variable user sets available.
Use this Setup item to change the high and low limits of each variable user set.
Table 3-4 shows the user default limit values for each set.
NOTE
The low limit can be set from 0 to less than or equal to the high limit, and the
high limit can be set from more than or equal to the low limit to less than or
equal to the maximum display count (19999).
Parameter Range Default setting
– H(01 to 16) or
– L(01 to 16)
0 to 19999 See Table 3-4
Table 3-4 Default user high/low limit values
Set High limit (H) Low limit (L)
U01 1000 900
U02 1200 1080
U03 1500 1350
U04 1800 1620
U05 2200 1980
U06 2700 2430
U07 3300 2970
U08 3900 3510
U09 4700 4230
U10 5600 5040
U11 6800 6120