3Setup Options
66 Keysight U1731C/U1732C/U1733C User’s Guide
Using the Setup Menu
The Setup menu allows you to change a number of nonvolatile preset features.
Modifying these settings affects the general operation of your LCR meter across
several functions. Select a setting to edit to perform one of the following:
– Switch between two values, such as on or off.
– Cycle through multiple values from a predefined list.
– Decrease or increase a numerical value within a fixed range.
The contents of the Setup menu are summarized in Table 3-2 on page 68.
Table 3-1 Setup menu key functions
Legend Description
Press and hold while turning the LCR meter ON ( ) to access the Setup menu.
Press and hold for more than 1 second to exit this mode.
Press or to step through the menu items.
Press or at each menu item to change the preset settings. The menu item (in the secondary
display) will flash to indicate that you can now change the menu item values.
Press or again to switch between two values, to cycle through multiple values from a list, or to
decrease or increase a numerical value.
While the menu item is flashing, press to save your changes.
While the menu item is flashing, press to discard your changes.
To Next Page
Loading...
