Keysight U1732C - Changing the Power-On Limit Category and Set; Figure 3-8 Changing the Power-On Limit and Category Set

Setup Options 3
Keysight U1731C/U1732C/U1733C User’s Guide 79
Changing the power-on limit category and set
This setting is used with the Limit comparison function (page 58). There are 32
limit sets available (16 fixed factory sets, and 16 variable user sets).
Use this Setup item to change the default category (factory or user) and set (1 to
16) for subsequent power cycles.
Figure 3-8 Changing the power-on limit and category set
Parameter Range Default setting
Pon
– Factory (Ft01 to Ft16) or
– User (Ur01 to Ur16)
Ft01
Press
Press
Press
Press
Press
Press
Press
Press