Keysight U1732C - Figure 2-15 Using the Limit Function

Features and Functions 2
Keysight U1731C/U1732C/U1733C User’s Guide 59
Press the key for more than 1 second to activate the high/low limit mode. The
last-known set number (H## or L##) will be indicated in the secondary display.
Figure 2-15 Using the Limit function
While the annunciator is flashing, use the or key to select an
appropriate limit set.
NOTE
The default values of the variable user sets are set to the same as the fixed user
sets. Use the Setup menu to change the high and low limits for each set. See
“Changing the user high/low limit values” on page 80 for more information.
Limit
DQO
Limit
DQO
>1s
Freq.