Keysight U1732C - Changing the Beep Frequency; Figure 3-13 Changing the Beep Frequency

Setup Options 3
Keysight U1731C/U1732C/U1733C User’s Guide 85
Changing the beep frequency
The LCR meter’s beeper alerts users to the presence of newly sensed values for
static recordings, sensed values that are out of tolerance or limits set, as well as
invalid key operations.
Use this Setup item to change the driving frequency of the beeper.
Figure 3-13 Changing the beep frequency
Parameter Range Default setting
bEP (2000, 3000, 4000) Hz or oFF 4000 Hz
Press
Press
Press
Press
Press
Press