Keysight U1732C - Setting the High;Low Limit Comparison (Limit); Table 2-6 Factory Default High and Low Limit Values

2 Features and Functions
58 Keysight U1731C/U1732C/U1733C User’s Guide
Setting the high/low limit comparison (Limit)
The high and low limit comparison function helps you to sort components easily.
There are 32 limit sets available (16 fixed factory sets, and 16 variable user sets).
The LCR meter will use the factory sets by default. You can set the LCR meter to
use the user sets upon start-up from the Setup menu. See “Changing the
power-on limit category and set” on page 79 for more information.
Table 2-6 shows the factory default limit values for each set.
Table 2-6 Factory default high and low limit values
Set High limit (H) Low limit (L)
F01 1000 900
F02 1200 1080
F03 1500 1350
F04 1800 1620
F05 2200 1980
F06 2700 2430
F07 3300 2970
F08 3900 3510
F09 4700 4230
F10 5600 5040
F11 6800 6120
F12 8200 7380
F13 10000 9000
F14 12000 10800
F15 15000 13500
F16 18000 16200