Keysight U1732C - Measuring Resistance (R); Figure 2-6 Resistance Measurement

Features and Functions 2
Keysight U1731C/U1732C/U1733C User’s Guide 49
Measuring resistance (R)
Set up your LCR meter to measure resistance as shown in Figure 2-7.
1 Press to power on the LCR meter.
2 Press to select a suitable test frequency, and
a press to enable the auto identification function; or
b alternatively press to select resistance measurement.
Figure 2-6 Resistance measurement
3 Insert a resistor into the component socket or connect the test clip to the
component leads as required.
4 Read the display.
CAUTION
To avoid possible damage to your LCR meter or to the equipment under test,
disconnect the circuit power and discharge all high-voltage capacitors
before measuring resistance.
Freq.
PS
ZLCR