KidKraft WINDALE - Attach Glider and Swings

53
A: Connect the assembled Glider to the Glider Hangers previously installed. (g. 33.1)
B: Attach 2 Belt Swings to the Bolt-Thru Swing Hangers. (g. 33.1)
Use an extra
Flat Washer
If Bolt protrudes
beyond T-Nut
WARNING: Check entire play centre
for bolts protruding beyond T-Nuts. Use
extra washers to eliminate this condition.
Step 33: Attach Glider and Swings
Glider
Belt Swings
2 x Belt Swings
Other Parts
Fig. 33.1