KitchenAid 5KFP1335 - Preparing the Food Processor for First Use; Before First Use; Removing the Work Bowl Cover from the Work Bowl

14
SETTING UP YOUR FOOD PROCESSOR
Removing the work bowl cover from the work bowl
Before rst use
PREPARING THE FOOD PROCESSOR FOR FIRST USE
YourFoodProcessorisshippedwiththeworkbowlcoverinstalledontheworkbowl,withthe
mini-bowl* inside the work bowl.
To remove the work bowl cover from the work bowl for initial cleaning:
BeforeusingyourFoodProcessorforthersttime,washtheworkbowl,workbowlcover,
mini-bowl*,feedtubepushers,discs,andbladeseitherbyhandorinthedishwasher(see
“Cleaning the Food Processor”).
1
Grasp the feed tube on the work bowl
cover and turn it clockwise to remove it
from the work bowl.
2
Lift out the mini-bowl*.
Oncewashed,disassembleddiscs,shafts,
and blades should be stored in the provided
storagecase*,inalocationoutofthereach
of children. The mini-bowl* can nest inside
the work bowl for convenient storage.
* Included only in model 5KFP1335
W10505785C_01_ENv08.indd 14 9/12/14 8:24 AM