KitchenAid 5KFP1335 - SETTING UP YOUR FOOD PROCESSOR; Attaching the work bowl

15
English
SETTING UP YOUR FOOD PROCESSOR
Attaching the work bowl
NOTE:Selecttheaccessoryyouwouldliketouseandinstallitaccordingtothe
instructions on the following pages.
Power Shaft
1
PlacetheFoodProcessoronadry,level
countertop with the controls facing
forward. Do not plug in the Food
Processor until it is completely assembled.
2
Placetheworkbowlonthebase,
aligning the raised portion with the
indentation on the base. The center
holeshouldtoverthepowershaft.
3
Grasp the work bowl handle and
turn the bowl counterclockwise
to lock it on the base.
PREPARING THE FOOD PROCESSOR FOR FIRST USE
W10505785C_01_ENv08.indd 15 9/12/14 8:24 AM