KitchenAid 5KFP1335 - Installing the multipurpose blade or dough blade

20
SETTING UP YOUR FOOD PROCESSORSETTING UP YOUR FOOD PROCESSOR
Installing the multipurpose blade or dough blade*
1
Place the blade on the power shaft.
Rotate the blade so it falls into place
on the power shaft.
2
Pushtolock.Pressdownrmlyonthe
multipurpose blade until it is down as
far as it will go. The multipurpose blade
featuresaninternalsealthattstightly
over the center of the work bowl.
Installtheworkbowlcover,being
sure it locks into place.
* Included only in model 5KFP1335
IMPORTANT: The multipurpose blade and dough blade* can only be used with the work bowl.
W10505785C_01_ENv08.indd 20 9/12/14 8:24 AM