KitchenAid 5KFP1335 - Installing the egg whip

22
SETTING UP YOUR FOOD PROCESSOR SETTING UP YOUR FOOD PROCESSOR
Installing the egg whip*
2
With the work bowl in place on the
base,placetheeggwhiponthepower
shaft. Rotate the egg whip so it falls into
place on the power shaft.
1
Be sure the egg whip is properly
assembled. If the two pieces have been
disassembledforcleaning,alignthepin
on the egg whip adapter with the slot
ontheeggwhip,androtatetolockinto
place.
3
Installtheworkbowlcover,beingsure
it locks into place.
IMPORTANT: The egg whip can only be used with the work bowl.
* Included only in model 5KFP1335
W10505785C_01_ENv08.indd 22 9/12/14 8:24 AM