127
Connect the lter start signal from the EVOT+ controller.
Fig. 66
15. CERTIFICATES, STANDARDS,
DECLARATIONS
CE conformity
This products meets EN requirements:
PN-EN 61131-2:2008 Programmable controllers – Part 2:
Requirements and measurements related to the equip-
ment
15.1 General info
Power supply voltage: 230 VAC ± 10%, 50/60Hz
Absorbed current: 6VA (outputs P1,P2 no
load)
Ambient temperature: +5…45°C Storage tempe-
rature:
-25...50°C
Conformity with
This product meets the
requirements of the Eu-
ropean standards for elec-
tromagnetic compatibility
PN-EN 61131-2 and has
the CE mark.
16. SERVICE INFO
Please contact Service Department to get more info about
operation of this equipment:
KLIMOR:
Tel.: (+48 58) 783 99 50/51
Mob.: (+48) 782 800 566
E-mail: serwis@klimor.com
KLIMA-THERM:
Tel.: (+48 58) 768 04 49
Fax: (+48 58) 768 03 00
E-mail: serwis@klima-therm.com
According to valid regulations concerning used (end-oife)
electric and electronic equipment, this product cannot be
disposed as household waste. Collecting, disposing and
storing used electric and electronic equipment together
with other wastes is not allowed. Compounds inside elec-
tric and electrical equipment have got adverse eects on
the environment and people.
NOTE!
User of household used (end-of-life) appliances is obliged
to return it to the facility collecting electric and electronic
equipment. Selective collection of household wastes and
returning it for reprocessing, recovery, recycling and utiliza-
tion protects the environment against contamination and
pollution, as well as helps reduce use of natural resources
and lower manufacturing costs of new equipment.
To Next Page
Loading...
