KLS Martin marLED E9

To Next Page

To Previous Page





Service ManualService Manual

Operating Lights marLEDOperating Lights marLED

®®

E9 / E9i / E15E9 / E9i / E15

V V 1.0 1.0 1717

4.3.34.3.3



Circuit Diagram for 9-Pole Tracking Arm with Wall-Mounted Control PanelCircuit Diagram for 9-Pole Tracking Arm with Wall-Mounted Control Panel

and Camera Optionand Camera Option

A Tracking Tracking arm arm B B Spring Spring armarm

1 1 Plug Plug for for connection connection to to ceiling ceiling tube tube 4 4 Socket, Socket, tracking tracking arm arm sideside

2 2 Slip Slip ring ring 5 5 Socket, Socket, light light head head sideside

3 Plug3 Plug

6 6 backLite backLite connection connection optionoption

7 7 Socket, Socket, 5-pole 5-pole (DIN (DIN 41524, 41524, soldering soldering side)side)

8 8 Socket, Socket, 8-pole 8-pole (DIN (DIN 45326, 45326, soldering soldering side)side)

Ceiling tube < 400 mm -> DIN socket (7) soldered directly to cableCeiling tube < 400 mm -> DIN socket (7) soldered directly to cable

Ceiling tube > 400 mm -> DIN socket (7) soldered directly to cable, plus 5-pole extensionCeiling tube > 400 mm -> DIN socket (7) soldered directly to cable, plus 5-pole extension

cable (plug / socket)cable (plug / socket)

In multi-light setups, all CAN connecting cables (CAN+ WH, CAN- BN) are parallel-soldered toIn multi-light setups, all CAN connecting cables (CAN+ WH, CAN- BN) are parallel-soldered to

DIN socket (7).DIN socket (7).

When using a combination of lights, please note the different color marks on the connectors.When using a combination of lights, please note the different color marks on the connectors.

Tracking arm 1:Tracking arm 1:

