KLS Martin marLED E9 - Installing the Light Engine



Service ManualService Manual
Operating Lights marLEDOperating Lights marLED
®®
E9 / E9i / E15E9 / E9i / E15
V V 1.0 1.0 3737
Risk of damage to cables!Risk of damage to cables!
•• Do not pull on the cables!Do not pull on the cables!
••
 Remove the plug connections only by handling the connector casings!Remove the plug connections only by handling the connector casings!
••
Use the unplugging tool (Item no. 08-670-50-04) to remove the plug connections.Use the unplugging tool (Item no. 08-670-50-04) to remove the plug connections.
••
 Turn around the Light Engine (6) and unplugTurn around the Light Engine (6) and unplug
the cable with appropriate tools (7).the cable with appropriate tools (7).
Now a new Light Engine can be installed (seeNow a new Light Engine can be installed (see
section 6.5 “”, page 37).section 6.5 “”, page 37).
6.56.5

Inserting the Light EngineInserting the Light Engine
••
 Plug the cable into the socket (2) of thePlug the cable into the socket (2) of the
Light Engine (1).Light Engine (1).
NOTICENOTICE