KLS Martin marLED E9 - E9; E9 I; E15; Interface



Service ManualService Manual
Operating Lights marLEDOperating Lights marLED
®®
E9 / E9i / E15E9 / E9i / E15
V V 1.0 1.0 2727
4.6.34.6.3

RS232 via COM RS232 via COM InterfaceInterface
Separate COM interfaceSeparate COM interface
The COM interface with RS232 serves as interface and can be mounted to the top-hat rail onThe COM interface with RS232 serves as interface and can be mounted to the top-hat rail on
the ceiling tube using an angle bracket or can be mounted externally.the ceiling tube using an angle bracket or can be mounted externally.
1 1 Arm Arm System System with with Light(s)Light(s)
2 CAN-Bus2 CAN-Bus
3 3 RS232 RS232 PlugPlug
4 4 RS232 RS232 Cable Cable 2m2m
5 5 COM COM InterfaceInterface
6 6 RS232 RS232 ConnectionConnection
All lights must be wired with 5-pin lines.All lights must be wired with 5-pin lines.
COM interface in the wall boxCOM interface in the wall box
1 1 Arm Arm System System with with Light(s)Light(s)
2 CAN-Bus2 CAN-Bus
3 3 RS232 RS232 PlugPlug
4 4 RS232 RS232 Cable Cable 2m2m
5 5 Wall Wall Box Box with with COM COM InterfaceInterface
6 6 RS232 RS232 ConnectionConnection
NOTICENOTICE