Service ManualService Manual
Operating Lights marLEDOperating Lights marLED
®®
E9 / E9i / E15E9 / E9i / E15
VV 1 01 0 8383
3.) Checking the Suspension Arm System3.) Checking the Suspension Arm System
Tools / aids required:Tools / aids required:
caliper gauge, flat-tip screwdriver, cross-tip screwdriver, hexagon caliper gauge, flat-tip screwdriver, cross-tip screwdriver, hexagon socket wrench, contactsocket wrench, contact
spray, grease (e.g. Molycote MOS 2), spray, grease (e.g. Molycote MOS 2), Loctite sealantLoctite sealant
a) Checking and securing the fixing a) Checking and securing the fixing screwsscrews
Fig. Fig. 10-7 10-7 Ceiling-tube Ceiling-tube and and tracking-arm tracking-arm fixing fixing screwsscrews
••
Check all fixing screws for corrCheck all fixing screws for correct insertion and fixation (i.e. the six ect insertion and fixation (i.e. the six screws with which thescrews with which the
tracking arm is mounted on the ceiling tube and the two screws with which the spring armtracking arm is mounted on the ceiling tube and the two screws with which the spring arm
is fitted to the tracking arm).is fitted to the tracking arm).
Danger of damage or injury by crashing-down Danger of damage or injury by crashing-down arm system!arm system!
As the tracking and spring arms are very heavy, they could easily fall down once the fixingAs the tracking and spring arms are very heavy, they could easily fall down once the fixing
screws have been loosened or removed!screws have been loosened or removed!
••
Therefore, work with an assistant when removing or installing light or suspensionTherefore, work with an assistant when removing or installing light or suspension
components and / or use a lifting device!components and / or use a lifting device!
••
Replace missing screws and secure all screws with Replace missing screws and secure all screws with Loctite screw-locking varnishLoctite screw-locking varnish one afterone after
the otherthe other..
••
√√
WARNINGWARNING
To Next Page
Loading...
