KNS supertrack S3 - Display of Tracking on Gyro Mode

To Next Page

To Previous Page

HALT

: If the antenna experiences the same control error twice within 3 minutes, the

PCU isn’t supplying the torque to all motors to protect the antenna. In this case, the

ACU will display ‘HALT’ on the LCD. The antenna continues in ‘halt’ mode until the

ACU power has been reset.

Figure 3-4 Display of tracking on gyro mode

NOTE

: For the first power-on of the GPS antenna, it will take about 5 minutes to

calculate your location from the GPS satellites’ signals and configure the database.

NOTE

: Do not push any buttons during the self-diagnosis sequence.