KNS supertrack S3 - Edit the Tilt Offset; Request the Current Tilt Offset Using the ‘Ibd’ Command

51
c. Change the tilt offset of level and cross axis to place the bubble of the bubble
inclinometer in the center
d. Click ‘Tilt Offset’ to upload to the PCU.
Figure 4-14 Edit the Tilt Offset
e. If the tilt offset is correct, click ‘Tilt Initial OFF’, whereupon the antenna will start
initializing.
Figure 4-15 Request the Current Tilt Offset Using the ‘Ibd’ Command