Kodak RVG 6500 IPS System - Installing KODAK Dental Imaging Software

KODAK RVG 6500 System_User & Installation Guide (SM728)_Ed01 19
Installing the KODAK Dental Imaging Software
Before installing the KODAK Dental Imaging Software, check that:
• The computer has all the PC system requirements
• You have the software DVD as of version 6.12 or higher
To install the KODAK Dental Imaging Software, follow these steps:
1 Insert the software DVD in the DVD-ROM drive of the computer.
Wait for the installation program to start. If the program does not start automatically, click Start >
Run and enter D:\setup.exe if D is the letter for the DVD-ROM drive, or the letter of the relevant
drive on the computer.
2 The Choose Setup Language dialog box is displayed. Select the installation language and click
OK.
3 The Kodak Dental Imaging Software welcome page and the InstallShield wizard are displayed.
4 The Welcome to KODAK Dental Imaging Software Installation dialog box is displayed. Click
Next to launch the installation.