34 Chapter 6 Acquiring an Image
Acquiring an Image with the RVG Sensor
To acquire an image with the RVG sensor, follow the instructions in the presented order.
Preparing the RVG Sensor
To prepare the selected RVG sensor, follow these steps:
1 Select an appropriate positioner for the region of interest and the sensor size.
2 Cover with a disposable hygienic sleeves specifically designed for each sensor size.
.
3 Place the protected RVG sensor in the sensor positioner’s biteblock.
Important: To prevent cross-contamination, use a new hygienic
barrier for each new patient.
To Next Page
Loading...
