52 Chapter 7 RVG Mobile Application
3 Tap on the selected name, the displayed window presents the patient information and the sensor
status.
Acquiring an Image with the RVG Mobile Application
Preparing the RVG Sensor
To prepare the selected RVG sensor, follow these steps:
1 Select an appropriate positioner for the region of interest and the sensor size.
2 Cover with a disposable hygienic sleeves specifically designed for each sensor size.
.
3 Place the protected RVG sensor in the sensor positioner’s biteblock.
Important: To prevent cross-contamination, use a new hygienic
barrier for each new patient.
To Next Page
Loading...
