Previous editions
Edition Comments
05 / 1999 Preliminary version
10 / 1999 First edition
06 / 2002 new layout, several corrections, valid from firmware 3.54
11 / 2005 Valid for the S300/S400/S600 series, several corrections, company name changed, front- and back-page new design
12 / 2005 Language improvements in the english version
09 / 2006 New Design
08 / 2007 Branding, S700 new, Symbols, Standards
12 / 2008 Several corrections, PNU1785 expanded
07 / 2009 Product branding
12 / 2009 Several minor corrections, Symbols according to ANSI Z535
12 / 2010 Company name new
07 / 2014 Warning notes updates, design cover page
04 / 2016 Safe voltage changed to 50V, warning symbols updated, european directives updated
04 / 2017 Use as directed updated, hints for PDF usage new, PNU930 "-7" Servo Pump new, opmode -7 new
SINEC is a registered trademark of Siemens AG
Technical changes to improve the performance of the equipment may be made without prior notice!
All rights reserved. No part of this work may be reproduced in any form (by photocopying, microfilm or any other method)
or stored, processed, copied or distributed by electronic means, without the written permission of Kollmorgen Europe
GmbH.
To Next Page
Loading...
Need help?
General
