1.4 Symbols used
Symbol Indication
Indicates a hazardous situation which, if not avoided, will result in death or
serious injury.
Indicates a hazardous situation which, if not avoided, could result in death
or serious injury.
Indicates a hazardous situation which, if not avoided, could result in minor
or moderate injury.
Indicates situations which, if not avoided, could result in property damage.
This is not a safety symbol.
This symbol indicates important notes.
1.5 Standards used
Standard Content
ISO 4762 Hexagon socket head cap screws
ISO 11898 Road vehicles — Controller area network (CAN)
ISO 13849
Safety of machinery: Safety-related parts of control systems
(former EN 954)
ISO 12100 Safety of machinery: Basic concepts, general principles for design
IEC 60085 Electrical insulation - Thermal evaluation and designation Maintenance
IEC 60204 Safety of Machinery: Electrical equipment of machinery
IEC 60364 Low-voltage electrical installations
IEC 60439 Low-Voltage Switchgear and Controlgear Assemblies
IEC 60664 Insulation coordination for equipment within low-voltage systems
IEC 60721 Classification of environmental conditions
IEC 61000 Electromagnetic compatibility (EMC)
IEC 61131 Programmable controllers
IEC 61491
Electrical equipment of industrial machines – Serial data link for real-time com-
munications between controls and drives.
IEC 61508
Functional safety of electrical/electronic/programmable electronic
safety-related systems
IEC 61800 Adjustable speed electrical power drive systems
IEC 62061
Functional safety of electrical/electronic/programmable electronic
safety-related systems
IEC 62079 Preparation of instructions - Structuring, content and presentation
ANSI Z535 Product safety (symbols, colors, information)
UL 840
UL Standard for Safety for Insulation Coordination Including Clearances and
Creepage Distances for Electrical Equipment
UL 508C UL Standard for Safety Power Conversion Equipment
ANSI American National Standard Institute, Inc.
IEC International Electrotechnical Commission
ISO International Organization for Standardization
UL Underwriters Laboratories
8 SERVOSTAR
®
601...620 Instructions Manual
General
07/2010 Kollmorgen
To Next Page
Loading...
Need help?
General
