Vers. 062721 17
Program/batch: a set of one or more screws sharing the same parameters (torque, angle,
speed, barcode, etc)
Program number: the identifier of one of the 64 configurable programs (1 to 64)
Current program: the program currently selected for rundowns
Program mode: in this mode, the unit works according the selected program
Sequence/Job: an ordered set of up to 16 programs, with the option to define how to
transition between programs
Sequence letter/number: the identifier of one of the 8 configurable sequences (A to H)
Current sequence: the sequence currently selected for rundowns
Sequence mode: in this mode, the unit works according to the selected sequence
OK/NOK: the result of the rundown. OK: rundown finished respecting all of the configured
parameters. NOK: rundown finished without respecting one or more of the configured
parameters.
To Next Page
Loading...
