.
OPERATION
DETAILED CONTROLS AND GAUGES
SLIDING DOOR
CAUTION
Be sure to check that the sliding door is locked in position both when it
is open and when it is closed.
Always stop the machine on level ground when opening or closing the
door.
If the door is opened or closed on a slope, there is danger that the
operating effort will suddenly change. Do not open or close the door on
slopes.
When opening or closing the door, always use door handle (1) and knob
(2).
Be careful not to get your hands caught between the front pillar or
center pillar.
If there is anyone inside the cab, call out to that person before opening
or closing the door.
Door Lock
When closing the door, pull the handle back to remove lock (3), then pull the door to the front.
3 - 83
To Next Page