.
MAINTENANCE
RECOMMENDED FUEL, COOLANT, AND LUBRICANT
USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE
ASTM: American Society of Testing and Material
Engine oil
pan
Swing
machinery
case
Final drive
case
(each)
PTO gear
case
Hydraulic
system
Fuel tank
Cooling
system
Specified
capacity
Liters 11.5 2.5 2.1 0.75 120 195 12.4
US gal 3.04 0.66 0.55 0.20 31.68 51.48 3.28
Refill
capacity
Liters 11 2.5 2.1 0.75 69 - -
US gal 2.91 0.66 0.55 0.20 18.22 - -
NOTICE
Always use diesel oil for the fuel.
To ensure good fuel consumption characteristics and exhaust gas characteristics, the engine mounted on this machine uses an
electronically controlled high-pressure fuel injection device. This device requires high precision parts and lubrication, so if low
viscosity fuel with low lubricating ability is used, the durability may drop markedly.
4 - 10
To Next Page
Loading...
