.
OPERATION
MACHINE OPERATIONS AND CONTROLS
PARKING MACHINE
WARNING
Park the machine on the firm, level ground.
Avoid parking the machine on slopes.
If it is unavoidably necessary to park the machine on a slope, put blocks
under the tracks and dig the work equipment into the ground surface to
stop the machine from moving.
If the control levers are touched by accident, the machine may move
suddenly, and this may lead to a serious accident. Before standing up
from the operator's seat, always set the lock lever securely to the LOCK
position.
Set the blade on the downhill side and lower it to the ground. (Blade
specification only)
1. Stop the machine. For details, see "Stopping Machine (PAGE 3-153)".
2.
Turn fuel control dial (1) to low idling position (MIN) and lower
the engine speed.
3.
Lower the bucket horizontally until the bottom touches the
ground.
4.
Lower the blade to the ground. (Only machines with blade
specification)
3 - 173
To Next Page
Loading...
