.
OPERATION
DETAILED CONTROLS AND GAUGES
Maintenance Selector Switch
When switch F5 is pressed on the standard screen, the monitor
display screen switches to the maintenance mode screen.
The items on the maintenance display are as follows.
ab
Engine oil change 500
Engine oil filter change 500
Fuel main filter change 1000
Fuel pre-filter change 500
Hydraulic oil filter change 1000
Hydraulic tank breather change 500
Damper case service 1000
Final drive case oil change 1000
Swing machinery case oil change 1000
Hydraulic oil change 5000
a: Maintenance items
b: Default maintenance interval settings (h)
c: Time remaining until maintenance (h)
3 - 38
To Next Page
Loading...
