Komatsu PC138US - Keep Machine Clean; Keep Operators Compartment Clean; Leaving Operators Seat with Lock

.
SAFETY
GENERAL PRECAUTIONS
KEEP MACHINE CLEAN
If water gets into the electrical system, there is a hazard that it
will cause malfunctions or misoperation. Do not use water or
steam to wash the electrical system (sensors, connectors).
If inspection and maintenance is carried out when the machine
is still dirty with mud or oil, there is a hazard that you will slip and
fall, or that dirt or mud will get into your eyes. Always keep the
machine clean.
KEEP OPERATOR'S COMPARTMENT CLEAN
When entering the operator's compartment, always remove all mud and oil from the soles of your shoes.
If you operate the pedal with mud or oil affixed to your shoes, your foot may slip and this may cause a serious
accident.
Do not leave parts or tools lying around the operator's compartment.
Do not stick suction pads to the window glass. Suction pads act as a lens and may cause fire.
Do not use cellular telephones inside the operator's compartment when driving or operating the machine.
Never bring any dangerous objects such as flammable or explosive items into the operator's compartment.
LEAVING OPERATOR'S SEAT WITH LOCK
Before standing up from the operator's seat (such as when
opening or closing the front window or roof window, or when
removing or installing the bottom window, or when adjusting the
operator's seat), always lower the work equipment completely to
the ground, set lock lever (1) securely to the LOCK position (L),
then stop the engine. If you accidentally touch the control levers
or control pedals when they are not locked, there is a hazard that
the machine may suddenly move and cause serious injury or
property damage.
When leaving the machine, always lower the work equipment
completely to the ground, set lock lever (1) securely to the LOCK
position (L), then stop the engine. Use the key to lock all the
equipment. Always remove the key, take it with you, and keep it
in the specified place.
2 - 14