Kongsberg cNODE Maxi - Deploying a transponder with a floating collar

322217/G
37
Context
Note
Itisveryimportantthattheseacurrentmeter’ ssensoreyefacesthecurrentforthe
bestresultpossible.
Procedure
1Mounttheseacurrentmetersensorbracketsonthesensor.
Makesuretheangleiscorrectinrelationtotheguidingtracksonthesensor.
Note
Theseacurrentmeter’ ssensoreyemustbefacingawayfromthetransponderand
otherstructures.
2Mountthesensortothetransponderwithamountingclamp.
3Mountthetransponderinthetransponderrackbyfasteningtheclampsaroundthe
transponder.
4Connectthecabletotheunit.
Alwaysapplygreasebeforematingconnectors.
Gettingstarted