Kongsberg cNODE Maxi - Replacing the sacrificial anodes; Resetting the pressure relief valve; Lubricating SubConn connectors

52
322217/G
4ReplacetheO-ringsthataredamagedorusedformorethanayear.
5MakesurethematingsurfacesandtheO-ringsarecompletelyclean.
6Wipeathinlmofsiliconegreaseovertheringsandmatingsurfaces.
Note
Donotlubricatetheelectromagneticinterference(EMI)shield(whiteorgreyish
ring).
Result
Followtheprocedureforopeningthetransponderinreverseordertocloseit.
InsertinganO-ring
TheO-ringsmustbeinspectedfordamageasoftenaspossible.
Procedure
Note
MakesuretokeeptheO-ringsandmatingsurfacesfreeofdustanddebris.
DonotuseascrewdriverorsimilarwhenremovingtheO-ring,useanO-ringtool.
1Openthetransponder.
2RemovetheexistingO-ring.
3Cleanthesurfaceandcoveritwithathinlmofsiliconegrease.
Uselint-freeobjectswhencleaningthesurfaces.
4InsertthenewO-ring.
5Closethetransponder.
Changingthebattery
Alwaysreadtheemergencyproceduresbeforehandlinglithiumbatteries.
Prerequisites
Thetranspondermustbeopentochangethebattery.
KongsbergcNODEInstructionManual