Kongsberg cNODE Maxi - Releasing the transponder manually; Closing the release unit

38
322217/G
SubConn
®
connectorsshouldnotbeexposedtoextendedperiodsofheatordirect
sunlight.Ifaconnectorbecomesverydry,itshouldbesoakedinfreshwaterbefore
use.
5Mountthearrangementtothecustomer’sstructure.
InstallingatransponderwithanMGCend
cap
Fourinsulationsleevesaredeliveredwiththemodule.
Prerequisites
Forsafetyreasons,thetransponderisdeliveredwiththebatteryoutside.Thebattery
mustbeinsertedandconnectedbeforethetransponderisdeployed.
Youneed4M8boltswithattinglengthandstrengthtoinstalltheMGC.
Procedure
1Mountthetransponderwiththetransducerhavingafreelineofsight.
2Entertheinsulationsleevesintotheboltholesinthebaseoftheunit.
3EnterM8boltsofttinglengthandstrengthtothesleeves.
4Fastenthebolts.
Installingaoatingcollar
Thetranspondermusthaveareleaseunit,oranadapterforabasicendcap,toinstalla
oatingcollar.
Prerequisites
Thetranspondermusthaveareleaseunit,oranadapterforabasicendcap,toinstalla
oatingcollar.
Procedure
1Removethetwosecuringscrews,Sonthereleaseunit.
2Insertthetransponder,Tintheoatingcollar.
KongsbergcNODEInstructionManual