To Next PageTo Next PageWhat does it mean if Konica Minolta Bizhub 282 is showing error EF09CF?
If your Konica Minolta All in One Printer displays error EF09CF, it means that the protocol is incorrect. To resolve this, ask the administrator to deactivate the protocol usage restrictions, or look for other delivery methods.
What to do if Konica Minolta Bizhub 282 is showing error ED09CA?
If your Konica Minolta All in One Printer displays error ED09CA, it indicates that an error occurred while data was being transferred. To resolve this, check that the FTP server is operating properly, or check that the LAN cable is not broken.
What to do if Konica Minolta Bizhub 282 All in One Printer is showing error ED09C9?
If your Konica Minolta All in One Printer displays error ED09C9, it indicates that the FTP server capacity is full. To resolve this, free up disk space on the FTP server.
What to do if Konica Minolta All in One Printer is showing error EF09D0?
If your Konica Minolta All in One Printer displays error EF09D0, it means that you have entered characters that cannot be used. To fix this, change the file name.
What to do if Konica Minolta All in One Printer is showing error EF09CD?
If your Konica Minolta All in One Printer displays error EF09CD, it indicates that available memory is not sufficient. To resolve this, expand the memory of this machine.
What to do if Konica Minolta Bizhub 282 All in One Printer is showing error ED09C8?
If your Konica Minolta All in One Printer displays error ED09C8, it means that the specified folder does not exist. Verify that the save destination folder exists and that you have entered the folder name correctly.
What to do if Konica Minolta All in One Printer is showing error ED09C7?
If your Konica Minolta All in One Printer shows error ED09C7, it means the user name or password you entered is incorrect. Double-check and correct the user name and password.
What to do if Konica Minolta Bizhub 282 is showing error ED09C6?
If your Konica Minolta All in One Printer displays error code ED09C6, it indicates that the LAN cable is either not connected or the destination address is incorrect. To resolve this, check that the LAN cable is correctly connected. Also, verify that the settings for the FTP server address, port number, and proxy server are correctly specified.
What to do if Konica Minolta Bizhub 282 shows "Malfunction detected"?
If the message "Malfunction detected" appears on your Konica Minolta All in One Printer, follow these steps: 1. Write down the malfunction code (e.g., C-0001) from the call technical representative screen. 2. Turn the machine off using the [Power] (auxiliary power) key and the main power switch. 3. Unplug the machine. 4. Contact your technical representative and provide them with the malfunction code.
What to do if Konica Minolta Bizhub 282 All in One Printer shows 'No response'?
If your Konica Minolta All in One Printer is showing 'No response' when trying to communicate with the Center, it indicates that the Center isn't responding. You can try the following: * Communicate with the Center again. * Check the communication environment of the Center side.
General| Functions | Print, Copy, Scan, Fax |
|---|---|
| Print Resolution | 600 x 600 dpi |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Fax Transmission Speed | 33.6 Kbps |
| Maximum Paper Size | A4 |
| Duplex Printing | Yes |
| Printing Technology | Laser |
| Original Size | A4 |
| Print Speed | 28 ppm |
| Copy Speed | 28 cpm |
| Network Connectivity | Ethernet |
| USB Connectivity | Yes |
| Zoom Range | 25% - 400% |
| Scan Speed (B&W) | 28 ipm |
