Before Making Copies
3
bizhub 500/420 3-65
3.7 Incompatible Copy Settings
Some copy settings cannot be combined and used together at the same
time. Priority is given to those settings that must not be combined. The
machine responds as follows if multiple copy settings that must not be
combined are specified.
- If the priority for the setting specified first is lower than that for the setting
specified next, the first setting will be cancelled automatically.
- If the priority for the setting specified first is higher than that for the setting
specified next, the machine prompts the user with the message stating
that the settings must not be combined, and then cancels the second
setting.
To give priority to the copy setting specified following the first setting
The Booklet setting is given higher priority than the 2 Position Staple setting.
As an example, the procedure for setting the Booklet function after selecting
the 2 Position Staple setting is described below.
1 Select the 2 Position Staple setting.
To Next Page
Loading...
Need help?
General
