4
Basic Copy Operations
4-28 bizhub 500/420
To specify/recall non-standard size (Custom Size)
Use this function to specify non-standard paper size to be loaded in bypass
tray.
0 Specify the dimensions of non-standard paper.
Available range for each is as follows.
Side X: 148.0 mm - 431.8 mm
0
Side Y: 92.0 mm - 297.0 mm
0 Two non-standard sizes can be stored and recalled. For details on
storing non-standard size, see "To store non-standard size (Custom
Size)" on page 4-31.
1 Touch [Paper] on the Basic Screen.
The Paper Screen will be displayed.
2 Touch the bypass tray key to highlight it, then touch [Change Tray
Settings].
The Change Tray Settings Screen will be displayed.
To Next Page
Loading...
Need help?
General
