Finishing/Folding
7
bizhub 500/420 7-29
To specify Separator output mode
0 As the default setting, Sort is selected. No limit is established in Sort
mode.
0 Some copy conditions are incompatible with Group mode. For details,
see "Copy Conditions Incompatible with Finishing/Folding" on
page 7-32.
0 If no finisher is installed and the following conditions are met, printed
copies can be fed out and sorted in an alternating crisscross pattern.
A4- or B5-size paper is used.
Paper of the same size and type is loaded with the crosswise orientation
v in one paper tray and with the lengthwise orientation w in other tray.
"Auto Paper Select" setting is selected.
The "Auto Zoom" setting is used when the Mixed Original setting is
selected.
0 The tray 1 (lower tray) capacity is max. 250 sheets, and tray 2 (upper tray)
capacity is max. 100 sheets. If a copy run of more than those limits is
required, be sure to remove the copies from the tray before the maximum
capacity is reached.
1 Position the original to be copied.
2 Using the keypad, enter the desired number of copies.
3 Load the desired copy paper size in a tray.
– When using an alternating crisscross pattern, load A4- or B5-size
paper with portrait orientation v in one paper tray and with the
landscape orientation w in other tray.
4 Touch [Finishing] on the Basic Screen.
The Finishing Screen will be displayed.
To Next Page
Loading...
Need help?
General
