Konica Minolta CHROMA METER - Page 77

You can check the details of the current data by
pressing the
RIGHT
key or
LEFT
key.
5. Press the
ENTER
key.
The screen for selecting from a list of measured
values is displayed.
6. Press the
UP
key or
DOWN
key to
select the measured value data used
as a target, and then press the
ENTER
key.
You can check the details of the selected data
by pressing the
RIGHT
key or
LEFT
key.
You can check the measurement condition,
target, user calibration value, etc. by pressing
the
INFO
key.
When no measured value has been stored yet,
the following alert screen is displayed. You need
to save a measured value rst.
7. Press the
ENTER
key on the
conrmation screen to return to the
menu screen.
8. Press the
ESC
key.
The measurement screen is displayed on the
LCD screen.
The specied values are stored even when the
power switch is set to OFF ().
75
Measurement
Preparation
TARGET