Kontron KTQ45/Flex - IDE Configuration

KTD-00782-H KTQ45 family Page 61 of 92
6.6.2 Advanced settings – IDE Configuration
BIOS SETUP UTILITY
Advanced
IDE Configuration
Options
Disabled
Compatible
Enhanced
<- Select Screen
|| Select Item
+- change option
F1 General Help
F10 Save and Exit
ESC Exit
Mirrored IDER Configuration [Disabled]
Configure SATA#1 as [SATA]
► Primary IDE Master : [Hard Disk]
► Primary IDE Slave : [Not Detected]
► Secondary IDE Master : [Not Detected]
► Secondary IDE Slave : [Not Detected]
► Third IDE Master : [Not Detected]
Hard Disk Write Protect [Disabled]
IDE Detect Time Out (Sec) [35]
Sata BIOS Extension [Enabled]
► AHCI Configuration
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
Feature
Options
Description
Configure SATA#1 as
SATA
RAID
AHCI
SATA
RAID
AHCI
Feature
Options
Description
Hard Disk Write Protect
Disabled
Enabled
Disable/Enable device write protection. This will be
effective only if device is accessed through BIOS
IDE Detect Time Out (Sec)
0
5
10
15
20
25
30
35
Select the timeout value for detecting ATA/ATAPI
device(s)
Sata BIOS Extension
Disabled
Enabled
Disabled
Enabled