Kontron KTQ45/Flex - Security Menu; Supervisor Password Protection; User Password and Password Check

KTD-00782-H KTQ45 family Page 80 of 92
6.9 Security Menu
BIOS SETUP UTILITY
Main
Advanced
PCIPnP
Boot
Security
Chipset
Exit
Security Settings
Install or Change the
password.
<-> Select Screen
|| Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Supervisor Password :Not Installed
User Password :Not Installed
Change Supervisor Password
Change User Password
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
Feature
Options
Description
Change Supervisor Password
Password
When not cleared the advanced Supervisor
Password protection system is enabled (see below
diagram). Hereafter setting can only be accessed
when entering BIOS as Supervisor.
User Access Level
Full Access
View Only
Limited
No Access
Only visible if Supervisor Password is installed.
Full Access: User can change all BIOS settings.
View Only: User can only read BIOS settings.
Limited: User can only read settings except: Date &
Time, Quick Boot, Quiet Boot, Repost Video on S3
Resume, Active State Power-
Management and
Remote Access.
No Access: User cannot enter BIOS, but if Password
Check = Always then User password will allow boot.
Change User Password
Password
Change the User Password
Password Check
Setup
Always
Only visible if Password is installed.
Setup: Protects only BIOS settings.
Always: Protects both BIOS settings and Boot.