KTD-00782-H KTQ45 family Page 74 of 92
6.6.12 Advanced settings – USB Configuration
Enables support for
legacy USB. AUTO option
disables if no USB
Devices are connected.
<-> Select Screen
|| Select Item
+- change option
F1 General Help
F10 Save and Exit
ESC Exit
Module Version – 2.24.5-13.4
USB Devices Enabled :
1 Drive
Legacy USB Support [Enabled]
USB 2.0 Controller Mode [HiSpeed]
► USB Mass Storage Device Configuration
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
Support for legacy USB Keyboard
Configure the USB 2.0 controller in HiSpeed
(480Mbps) or FullSpeed (12Mbps).
Note: This feature is not available when
Failsafe Defaults are loaded, because USB2.0
controller is disabled as default.
To Next Page
Loading...
