Grandstage X
-
Audio In settings
58
Limiter
This effect restricts the maximum volume of the input signal to a set level. A limiter works like a com-
pressor, but only signals that exceed the specified level are compressed to bring down unnecessary
peaks in sound.
Ratio: 1.0: 1...59.9, Inf: 1
Sets the compression ratio of the signal.
Threshold: -40.0...0.0 [dB]
Sets the signal level at which compression is applied.
Attack: 0.45...500.00 [ms]
Sets the compression attack time.
Release: 0.5...5000.0 [ms]
Sets the compression release time.
Tip:
Larger compression attack and release times increase the time it takes for compression to be applied.
Gain Adjust: -Inf, -84.9...+24.0 [dB]
Sets the output gain.
Graphic EQ
This is a stereo seven-band graphic equalizer. You can switch between 12 different settings for the
center frequency of each band, according to the sound you’re using.
Type
Selects the combination of center frequencies for each band.
1: Wide 1
Center frequencies [Hz]
2: Wide 2
Center frequencies [Hz]
1: Wide 1 2: Wide 2 3: Wide 3 4: Half Wide 1 5: Half Wide 2 6: Half Wide 3
7: Low 8: Wide Low 9: Mid 10: Wide Mid 11: High 12: Wide High
Band 1 2 3 4 5 6 7
Hz 80 220 500 1000 2500 6300 16000
Band 1 2 3 4 5 6 7
Hz 120 320 630 1200 3200 8000 18000
To Next Page
Loading...
