Grandstage X
-
MIDI settings
93
How the Grandstage X works when transmitting/receiving control change
messages
The way that the Grandstage X works when receiving control change messages, as well as the opera-
tions of the controllers on the Grandstage X that correspond to the control change messages and
how the settings are related are shown below.
Messages are transmitted and received on the same channel. If you are using two Grandstage X
instruments and wish to transmit and receive parameters between them, both instruments must be
set to the same transmit and receive MIDI channel.
You can assign either control change number “MIDI CC#0” through “MIDI CC#119” for the Foot Pedal
and Switch parameters in system settings. The transmit value ranges are all 0–127 for Foot Pedal, and
0 (Off) or 127 (On) for Foot Switch.
CC# Control Value Function
0 Bank Select (MSB) 0...127 -
1 Modulation wheel 0...127
Equivalent to operating the
modulation wheel
2 Breath Controller 0...127 -
3- - -
4 Foot controller 0...127 -
5 Portamento Time 0...127 -
6 Data Entry (MSB) 0...127 -
7 Volume 0...127
Volume (output stage of MAIN,
LAYER and SPLIT)
8 Balance 0...127 -
9- - -
10 Panpot 0...127
Pan (output stage of MAIN,
LAYER and SPLIT)
11 Expression 0...127
Volume (output stage of MAIN,
LAYER and SPLIT)
12 Effect Control 1 0...127 -
13 Effect Control 2 0...127 -
14 - - -
15
Controllers
(CC#: 15)
0...63(Off), 64...127(On)
Chord Lock Function
16 General Purpose Controller 1 0...127 -
17 General Purpose Controller 2 0...127 -
18 General Purpose Controller 3 0...127 -
19 General Purpose Controller 4 0...127 -
20...31 - - -
32 Bank Select (LSB) 0...127 -
33...37 - - -
38 Data Entry (LSB) 0...127 -
39...63 - - -
64 Damper Pedal 0...127 Damper Effect
65 Portamento On/Off 0...63(Off), 64...127(On) -
To Next Page
Loading...
