Touch the (Text Edit) button to open the Text Edit window. Enter the name, and confirm by
touching OK.
6. Touch OK to start the backup.
7. When finished, save the (removable) storage device in a safe place.
Full Resources Restore
This command fully restores the backup of the internal Factory and User data, created with the
“Full Resources Backup” command.
Warning: This command deletes all modified data in memory.
Hint: This command cannot be used to load single items (like a single Style, a bank of
Performances…). Backups are compact archives, that can only be restored as a full package.
Note: Loading a backup file created with previous Pa-Series (Pa80, Pa60, Pa50, Pa1X, Pa2X,
Pa800, Pa500) and i-Series instruments is not allowed.
Warning: Don’t play the keyboard while restoring data, and stay in the Media mode. Wait until
the “Wait” message disappears.
1. In case you are restoring from an external USB device, connect the device to one of the USB
Host ports.
2. Select the Full Restore Resources command, then touch Execute. The source device appears.
3. If needed, select a different device, by using the Device pop-up menu.
4. Browse through the files to find the backup file.
5. When the backup file (“.BKP” file) is in the display, select it and touch the Restore command.
6. When done, a message appears asking you to restart the instrument (“Data Restored. Please
switch off”). Turn the instrument off, then on again (you can use either the STANDBY or POWER
buttons).
Factory Restore
In case you want to erase all changes to your Factory and User data, and restore your Pa3X to
the same condition it was when it was new, you can use the Factory Restore procedure.
Warning: This command deletes all modified data in memory.
1. Select the Factory Restore command, then touch Execute. A message appears, asking you if
you want to erase all the data in the internal memory.
2. Touch Yes to confirm (or No to cancel). The original data will be restored.
Operating System Version Number
This line shows the installed Operating System version. From time to time, check our web site
(www.korgpa.com), to see if a newer, free version has been released.
To Next Page
Loading...
Need help?
General
