EasyManuals Logo

Korg Trinity V3 User Manual

Korg Trinity V3
194 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #107 background imageLoading...
Page #107 background image
41: Filter (Track 18)
99
A MIDI message of CC#65 will be transmitted at each on/off (a value of 0 for OFF, a value of 127
for ON).
With a setting of Modulation, the switch can be used as a source for Alternate Modulation or
Effect Dynamic Modulation. In this case, you must have specied the control destination.
For this function alone, the functions of SW1 and SW2 are different; SW1 is handled as CC#80, and
SW2 as CC#81.
For each on/off, CC#80 (or CC#81) will be transmitted (a value of 0 for OFF, a value of 127 for
ON).
41b: Enable Program Change
This determines whether MIDI Program Change and Bank Select messages will be received.
If this is checked, tracks whose 21c: Track Status is INT or BOTH will receive MIDI Program
Change and Bank Select messages whose channels match their own. However the Global mode
21a: Filter (page 136 in this manual) setting must also be checked to enable reception.
If this is un-checked, the track will not receive MIDI Program Change or Bank Select messages.
41c: Enable Control Change
This determines whether MIDI controller messages (ribbon, volume, pedal, panpot, etc.) will be
received.
If this is checked, tracks whose 21c: Track Status is INT or BOTH will receive MIDI controller
messages whose channels match their own. However the Global mode 21a: Filter (page 136
in this manual) setting must also be checked to enable reception.
If this is un-checked, the track will not receive MIDI controller messages.
41d: Enable Aftertouch
This determines whether MIDI aftertouch messages (Channel Aftertouch, Poly Key Pressure) will
be received.
If this is checked, tracks whose 21c: Track Status is INT or BOTH will receive MIDI aftertouch
messages whose channels match their own. However the Global mode 21a: Filter (page 136
in this manual) setting must also be checked to enable reception.
If this is un-checked, the track will not receive MIDI aftertouch messages.
41e: Enable Damper Switch
This determines whether MIDI Sustain (damper) messages will be received.
If this is checked, tracks whose 21c: Track Status is INT or BOTH will receive MIDI Sustain
messages whose channels match their own. However the Global mode 21a: Filter (page 136
in this manual) setting must also be checked to enable reception.
If this is un-checked, the track will not receive MIDI Sustain messages.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Korg Trinity V3 and is the answer not in the manual?

Korg Trinity V3 Specifications

General IconGeneral
BrandKorg
ModelTrinity V3
CategoryRecording Equipment
LanguageEnglish

Related product manuals