EasyManuals Logo

Korg Trinity V3 User Manual

Korg Trinity V3
194 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #85 background imageLoading...
Page #85 background image
1–1: Track Play/Rec (Track 1–8)
77
5. Sequencer mode
In sequencer mode you can playback and record a song, and edit the recorded data. You can also
record and edit patterns.
Sequencer P1
1–1: Track Play/Rec (Track 1–8)
1–2: Track Play/Rec (Track 9–16)
Here you can make basic settings for the entire song, and set the main parameters for each track.
For the basic procedure of realtime recording, refer to Basic Guide page 43, “About recording”.
11a: Location [001:01.000999:15.191]
This indicates the current location in the selected song, in units (from left to right) of measures,
beats, and clocks.
You can modify this value to move the current location. The display will change during playback,
and also in response to the [FF], [REW], and [RESET] keys located on the front panel.
This parameter will be displayed in pages 11: Track Play/Rec to 17: Preference, and can be
set from any page.
Each time the location is changed, a Song Position Pointer message will be transmitted. This mes-
sage can also be received by the TRINITY to change the location of its sequencer.
The range of beats and clocks will depend on the currently specied time signature.
11b: Song No. [0019]
Selects the song that you wish to record or playback. When the power is turned on, song 0 will be
displayed (other songs cannot be selected at rstsee below). You may record on
song 0
if you
wish.
When you select a new song, a dialog box will appear. If you wish to record that song, press the
OK button to allocate memory for the song and initialize its settings.
When the power is turned on, the song memory will be empty. In order to playback the sequencer,
you must load data from a oppy disk, or transmit MIDI dump data from an external MIDI
sequencer. For details refer to Basic Guide page 56, 9. Saving data.
Each time you select a song, a Song Select message and a Song Position Pointer message will be
transmitted. If there are tracks whose Track Status is set to EXT or BOTH, MIDI Bank Select, Pro-
gram Change, Volume, and Panpot messages will also be transmitted simultaneously on the MIDI
channels of those tracks.
1–1a
11b
11c
11d
11e
Track No.
11f
11g
11h
11i
Page Menu
11A
11B
11C
11D
11E

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Korg Trinity V3 and is the answer not in the manual?

Korg Trinity V3 Specifications

General IconGeneral
BrandKorg
ModelTrinity V3
CategoryRecording Equipment
LanguageEnglish

Related product manuals