To Next Page

To Previous Page

5–2: Track Name

115

5–2I: Insert Measure

This command inserts the speciﬁed number of measures into the track speciﬁed in the tab 2 dis-

play.

For details refer to “5–1I: Insert Measure.”

5–2J: Copy Measure

This command copies measures of the track speciﬁed in the tab 2 display.

For details refer to “5–1J: Copy Measure.”

5–2K: Move Measure

This command moves measures of the track speciﬁed in the tab 2 display.

For details refer to “5–1K: Move Measure.”

5–2L: Create Control Data

This command creates and inserts into the area speciﬁed in the tab 2 display control data that

changes smoothly until it reaches a speciﬁed value.

For details refer to “5–1L: Create Control Data.”

5–2M: Erase Control Data

This command erases control data from the area speciﬁed in the tab 2 display.

For details refer to “5–1M: Erase Control Data.”

5–2N: Quantize

This command quantizes (adjusts) the timing of musical data recorded in a track.

For details refer to “5–1N: Quantize.”

5–2O: Shift Note

This command shifts (moves) the range of data (of measures and pitches) speciﬁed in the tab 2 dis-

play by the speciﬁed amount.

For details refer to “5–1O: Shift Note.”

5–2P: Modify Velocity

This command modiﬁes the velocity values over time for the area speciﬁed in the tab 2 display,

using the speciﬁed curve.

For details refer to “5–1P: Modify Velocity.”

Korg Trinity V3 User Manual

Questions and Answers: