Korg Trinity V3 User Manual

1–1: Load
150
a: If a .PCG file is selected
All data included in the .PCG file will be loaded.
If the check box in the dialog box is
checked , files of the same name with a filename extension of
.SNG (normally loaded by “k: If a .SNG file is selected”, below) will also be loaded. However in
this case, the .PCG and .SNG files must be in the same directory.
1
In the tab 1 display, select a .PCG file.
2
When this command is selected, the dialog box at right will
appear.
3
To load the data press the OK button . To cancel loading,
press the
Cancel button .
b: If a .PCG file is opened, and a Program file inside it is selected
All program data of the .PCG file will be loaded.
1
In the tab 1 display, select a program file within a .PCG file.
2
When this command is selected, the dialog box at right will
appear.
3
To load the data press the OK button . To cancel loading,
press the
Cancel button .
c: If a .PCG file or program file is opened, and a Bank file inside it is selected
All program data of the selected bank will be loaded into the selected loading destination bank.
1
In the tab 1 display, select a bank file within a program file.
2
When this command is selected, the dialog box at right will
appear.
3
Select the loading destination bank.
4
To load the data press the OK button . To cancel loading,
press the
Cancel button .
5
On a TRINITY that does not have the PBS-TRI option
installed, the dialog box shown at right will appear when
you attempt to load a PCG file containing 128 bank M pro-
grams. Use the radio buttons to select the set of programs
that you wish to load, and press the
OK button to load the
programs.
To return to the previous display, press the
Cancel button .
d: If a .PCG file, a program file, or a bank file is opened, and a 1 Program file is selected
The selected 1 program will be loaded into the program number selected as the loading destination.
1
In the tab 1 display, select a 1 program file within a bank file.
2
When this command is selected, the dialog box at right will
appear. If you wish to load a program other than the pro-
gram selected in step
1 , re-select the desired program.
3
Select the loading destination bank and program.
4
To load the data press the OK button . To cancel loading,
press the
Cancel button .
e: If a .PCG file is opened, and a Combination file is selected
All combination data in the .PCG file will be loaded.
1
In the tab 1 display, select a combination file within a .PCG file.
2
When this command is selected, the dialog box at right will
appear.
3
To load the data press the OK button . To cancel loading,
press the
Cancel button .
f: If a .PCG file or a combination file is opened, and a Bank file is
selected
All combination data in the selected bank will be loaded into the bank selected as the loading des-
tination.
1
In the tab 1 display, select a bank file within a combination
file.
2
When this command is selected, the dialog box at right will
appear.
3
Select the loading destination bank.
4
To load the data press the OK button . To cancel loading,
press the
Cancel button .

Korg Trinity V3 Specifications

General

Brand	Korg
Model	Trinity V3
Category	Recording Equipment
Language	English