8–1: Master Effects
75
8–1d: Low/High Gain
Adjusts the tonal character of the audio signal that is output from output jacks 1/L/MONO and
2/R. The units are [dB].
Low Gain [–18.0…+18.0]
Adjusts the level of the low frequency range.
High Gain [–18.0…+18.0]
Adjusts the level of the high frequency range.
▼ Page Menu Command
8–1A: Write Combination
This command writes an edited combination into the currently selected combination number. Be
sure to write important combinations. If you turn the power off or select another combination
before writing, it will not be possible to recover the edited data.
For details refer to Basic Guide page 23, “9. Writing a program or combination”.
8–1B: Copy Master Effect
This command copies master effect settings from another program or combination into the master
effects of the currently selected combination.
To Next Page
Loading...
