Kramer Electronics Ltd.
VIA Connect² – For Web Administrator: Gateway Dashboard
Wi-Fi with AP Mode
VIA Connect² can set up a secure access point for users of your VIA Connect² network. This
setup is ideal for guest users who you may not want to connect directly to your network.
Figure 101: AP Mode
Setting up secure wireless access point:
1. Click AP Mode (Access Point Mode) and enter an SSID name and password.
AP Mode allows guests to join meetings without needing to login to the
corporate/institutional network.
• Under AP mode, there are 2 options: Legacy mode and Wi-fi quick connect.
In Legacy Mode, SSID should be min 4 and max 20 characters long at the gateway
client side. Password should be min 8 and max 50 characters long. In Legacy Mode,
the SSID will show without the addition of the numbers and letters.
Figure 102: Legacy Mode
To Next Page
Loading...
